Medium Pressure UV Sterilizer for Various Water Quality Disinfection Equipment

Product Introduction

Principle of Medium-Pressure Sterilizer for Water Disinfection and Sterilization

The treated water enters the UV sterilizer chamber through the inlet. The ultraviolet light waves have cavitation, mixing, cracking, oxidation, push-flow, sterilization, and algae-killing effects on the water, achieving auxiliary sterilization and degradation of organic matter. The local shock waves generated cause turbulent flow in the treated water, ensuring more thorough and uniform contact between the water and ultraviolet light, resulting in more efficient sterilization. At the same time, the ultraviolet light waves, combined with strong ultraviolet C (UVC) at a wavelength of 253.7 nm, irradiate the water flow, achieving broad-spectrum sterilization and ensuring that the treated water achieves sterilization effects in a very short time.

Advantages of UV Sterilizers

UV disinfection technology is a new generation of disinfection technology that emerged internationally in the late 1990s. It integrates optics, microbiology, electronics, fluid mechanics, and aerodynamics, featuring broad-spectrum capability, long lifespan, large water capacity, and no secondary pollution. It is internationally recognized as the mainstream disinfection technology of the 21st century.

Product Features:

1. Rapid and effective killing of various bacteria, viruses, and other microorganisms.

2. Effective degradation of chlorides in water through photolysis.

3. Simple operation and convenient maintenance.

4. Small footprint and large water treatment capacity.

5. Strong environmental friendliness with no toxic side effects.

6. Low investment cost, low operating expenses, and easy equipment installation.

7. The inner wall treatment process, designed using optical principles, maximizes the utilization of ultraviolet light in the chamber, doubling the sterilization effect.

Water Quality Requirements for Ensuring Sterilization Effect

Iron content: not exceeding 0.3 ppm (0.3 mg/L) Hydrogen sulfide: not exceeding 0.05 ppm (0.05 mg/L)

Solid suspended matter: not exceeding 10 ppm (10 mg/L) Manganese content: not exceeding 0.5 ppm (0.5 mg/L)

Water hardness: not exceeding 120 mg/L Color: not exceeding 15 degrees

Water temperature: 5°C to 60°C

Application Areas

1. Water purification disinfection, tap water, direct drinking water, purified water, secondary water supply systems for residential buildings, community office buildings, hotels, restaurants, etc.